No Products in the Cart
Bonbon polymer clay cutters available in 3 different sizes.
S - 30mm x 10mm
M - 40mm x 13mm
L - 50mm x 16mm
As this is a mirrored shape, you will receive two cutters.
Our shape cutters are custom designed for you to achieve optimal results.
- A tapered edge that reaches a final 2mm cutting edge thickness at the base of the cutter. These cutters are one of the thinnest cuts in the 3D printed cutter market.
- A lip at the top of the cutter so it is easy to lift up after being pressed into polymer clay
- It is expected that a small amount of sanding of your polymer clay piece is required after using these cutters. We do not guarantee a perfect cut, but it will be a very clean cut.
*Do NOT buy this product if you are not willing to sand the final piece. Whilst we strive for a clean cut, due to the nature of 3D printing, we cannot guarantee that every single cutter will cut exactly the same and some imperfections may require a small amount of sanding.
-All cutters are made from PLA+ which is biodegradable and derived from renewable sources such as fermented corn starch.
-Press the cutter gently into polymer clay, making sure you cut all the way through the clay slab. Lightly lift the cutter and gently remove the polymer clay from the cutter with your finger. To avoid getting clay stuck in the polymer clay cutter and using your fingers to remove it, place your polymer clay slab on a ceramic tile and cut your shapes out onto that surface.
-The edges of the polymer clay can be smoothed out with your fingers or can be sanded down after the clay has been cured.
-Clean the cutters with warm, soapy water. They are not dishwasher safe.