Before pouring the next lot of resin in your used mould, it is important to thoroughly clean the mould from your previous pour. Here are our top tips on how to remove the existing, cured resin from your silicone moulds:

- Peel the large bits of cured resin off with your fingers 

- Use blu tack or masking tape to pick up the small bits of resin stuck in the cavity 

- Use a compostable antibacterial or wet wipe to remove the final bits of resin on the top of the mould (not the cavity)

Hindsight will thank you for properly cleaning the mould before casting new earrings - trust me!